{"product_id":"bi-xenon-morimoto-micro-d2s-5-0-2-5in-lhd-pr50","title":"Morimoto Bi-Xenon: Morimoto Micro D2S 5.0 (2.5in) (LHD)","description":"\u003cp\u003e\u003c\/p\u003e\u003cli\u003eProjectors: 2x (One Pair) Micro D2S 5.0 Bi-Xenon Projectors\u003c\/li\u003e\u003cli\u003eHardware: 2x 9006 Solenoid Input Pigtails, Bulb Holders, Mounting Hardware\u003c\/li\u003e\u003cli\u003eWarranty: \u003ca href=\"https:\/\/www.morimotohid.com\/policies\" target=\"_blank\"\u003e3 Years (Click for Details)\u003c\/a\u003e\n\u003c\/li\u003e\u003cp\u003eHigh Five! Morimoto has officially achieved Projector-Perfection with the 5th gen Mini D2S Bi-xenons! If you're looking for the ultimate beam pattern boner; it's really not going to get any better than this folks. Perfectly balanced beam. The crispiest ECE style cutoff. Unquestionable OEM-quality all packed into a projector that's undeniably easy to install. If we died and went to fog light heaven, the 5.0 would be greeting us at the gate. Projector-Perfection: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width.But no other option creates the perfect balance of width \u0026amp; hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark; Morimoto baked in best practices from a variety of well-respected OEM and aftermarket projectors. With over a decade of experience, we trust that their latest and greatest equates to the perfect all-around perfomer. Distance: The hot spot on the new 5.0 bi-xenon is roughly 70% brighter than the already-impressive 4.0 design. While the high beam unloads a lot more volume of light; virtually no additional intensity has been reserved. What that means: You get the maximum benefit from your bulbs \u0026amp; ballasts in default mode--where drivers spend 99% of their time. The controlled decrease in intensity from the hyper-hotspot down through the foreground results in a distribution of light that makes driving at night very comfortable \u0026amp; safe. Why? Because too much intensity on the ground too close to the front of your vehicle will make your eyes adjust, compromising your ability to see very far. Science! Width: Power is nothing without control, and even the best D2S bulbs and 50w ballasts won't always result in a satisfying output when projected out on the road improperly--so the KEY is really how that light is deployed. Thanks to the beauty in the center of this beast [all new optics package + flat cast cutoff shield] You really end up with a beam pattern that's extremely wide and flat, with zero bowing. But that's not all: The position of the shield has been fine-tuned so that there is a band of intense light that spans side-to-side directly under the cutoff line. RX350 Bi-xenons, S2000's, LS430s, SC430--all of the best from Koito now need to bite their tongue, because that's all they had on Morimoto prior to the 5.0 party! Anti-Reflective Coating Lens: The blue tint to the lens is more than marketing fluff too. That's an AR coating, and it serves a real purpose. AR coatings increase the transmission of light through the glass all while decreasing bleed. The result? 10% more light and less glare compared to a traditional clear lens. The blue-hue may not be for everybody, but in this case we're down. Hardware Upgrades: Forget the finicky 2 piece bulb holders found on the 4.0s, these come standard with the MotoHolders: an all-new one-piece design that's far easier to work with. The new CNC machined aluminum lock rings are not only pretty looking, but they're 300% stronger than the old die cast part. To tighten them, Morimoto now offers an optional lock-ring tightening tool that works with any 10mm socket set. Torx screws now hold the lens holder on too instead of Philips screws. While the 5.0 get's a big boost in the performance department, it's also clear they've paid attention to the details in the parts department too. We like it! Installation Summary: On a H4-based fog light reflector for example... Remove the fog light lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the fog lights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cli\u003ePower: 35w HID Systems Only\u003c\/li\u003e\u003cli\u003eTraffic Pattern: LHD\u003c\/li\u003e\u003cli\u003eLens Diameter: 2.5in\u003c\/li\u003e\u003cli\u003eDimensions: 69mm H, 85mm W, 141mm D (incl. bulb holder)\u003c\/li\u003e\u003cli\u003eMounting Shaft: 34mm Diameter\u003c\/li\u003e\u003cli\u003eHousing Depth: 110mm Minimum\u003c\/li\u003e\u003cli\u003eLens Type: AR Coated 'Kuria Optic' Glass\u003c\/li\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":52024587059492,"sku":"PR50","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0671\/6801\/0532\/files\/morimoto-bi-xenon-morimoto-micro-d2s-5-0-2-5in-lhd-apollo-off-road-74460.jpg?v=1771481727","url":"https:\/\/autohousesupply.com\/products\/bi-xenon-morimoto-micro-d2s-5-0-2-5in-lhd-pr50","provider":"AutoHouseSupply","version":"1.0","type":"link"}