We are excited to announce our new BOSS800 hybrid turbo for the Audi/Porsche EA839 3.0T platform. This is a direct replacement upgrade that significantly increases airflow while retaining OEM-style fitment and drivability. This hybrid unit is optimized for higher boost efficiency and improved top-end power without sacrificing low-RPM response. The turbo utilizes an upgraded compressor and turbine configuration, allowing it to support a wide range of fuel blends from pump gas to ethanol mixes. All testing shown was performed on the same vehicle and hardware, with only fuel content changed between runs.
Power gains scale predictably with ethanol content, showing strong midrange torque and sustained power through the upper RPM range. Boost response remains smooth and controlled, making the turbo suitable for both street and track-focused builds. This turbo pulls all the way to redline and has more potential with additional fueling.
The best part is that this is a full brand-new unit that does not require a core and it is compatible with many off-the-shelf stage 3 tuning.
Turbocharger specs:
- 66mm turbo inlet, larger turbo inlet is required
- 66mm 7+7 design billet compressor wheel
- 63mm 9 blade high-flow turbine wheel
- Stainless steel exhaust housing, matched to increased flow of the turbine wheel
- Heavy duty bearings and thrust washers
- VSR balanced
- Compatible with any exhaust, any charge pipe, and 66mm turbo inlet
- Transfer of factory diverter valve and boost pressure relief valve (06M133554A, pay attention on how it is installed).
Dyno Results from our friends at Logic Street Performance (1/4 mile time: 10.29 at 140mph)
-
Run 1 – 92 Octane:
561 hp / ~532 lb-ft
-
Run 2 – E50 (92 + pump E):
640 hp / ~643 lb-ft
-
Run 3 – E55 (92 + pump E):
658 hp / ~654 lb-ft
-
Run 4 – E60 (92 + pump E):
671 hp / ~663 lb-ft
**Note that these results were achieved in a vehicle with full bolt-ons and upgraded fueling system (RS6 injectors, HPFP and LPFP upgrade, 4BAR Map sensors) and Logic Street Performance stage 3 tuning. Your result may vary.
Parts required for installation (not included):
- 2x 06M253039G – exhaust manifold gasket
-
1x 059253232C – exhaust ring gasket
-
1x WHT006901A – oil feed o-ring
-
3x WHT007689 – oil feed and coolant o-ring
-
4x WHT004982 – barrel nut
- 4x N91130801 – exhaust nut
-
1x WHT007923 – connecting pipe o-ring
-
2x 8K0253115K – exhaust gasket
- 1x N0138441 – seal for boost pressure relief (jet) valve
Fitment for vehicles with EA839 engines. Check with your tuner to compatible software:
- 2018 – 2023 B9/B9.5 Audi S4 3.0T
- 2018 – 2023 B9/B9.5 Audi S5 3.0T
- 2018 – 2023 B9/B9.5 Audi SQ5 3.0T
- 2020 – 2022 4M Audi Q7 3.0T
- 2019 – 2022 4M Audi Q8 3.0T
- 2019 – 2022 C8 Audi A6 3.0T
- 2019 – 2022 C8 Audi A7 3.0T
- 2020 – 2024 C8 Audi AllRoad 3.0T
- 2019 – 2023 D5 Audi A8 3.0T
- 2019 – 2021 Porsche Macan S 3.0T
- 2019 – 2023 Porsche Cayenne 3.0T
⚠️ California Proposition 65 Warning:
This product may expose you to chemicals known to the State of California
to cause cancer or reproductive harm.
The AutoHouse Advantage: Global sourcing power paired with specialized expertise. We utilize an expansive supply network of over 600,000 SKUs to deliver world-class components with an enthusiast’s precision.
|
Price Match Guarantee:
|
We are committed to providing the best value. If you find a lower advertised price from a verified vendor, we will match it. Shop with confidence knowing you’re getting the industry's lowest price.
|
|
Project Incentives:
|
We reward enthusiasts who trust us with their major projects. Use these tiered codes at checkout to apply instant savings to your order:
• AH25 — $25 OFF $500+ | • AH60 — $60 OFF $1000+
• AH180 — $180 OFF $3000+ | • AH400 — $400 OFF $6000+
• AH630 — $630 OFF $9000+
|
|
Fitment Guarantee:
|
Avoid the headache of the wrong part. If you are unsure about compatibility, contact us first. If we verify the fitment for your vehicle via email and it doesn’t fit, we will handle the exchange at no cost to you.
|
|
Authorized Retailer:
|
AutoHouse Supply is an Authorized Retailer for our premier brand partners. We utilize an extensive wholesale network to ensure all 600k+ SKUs in our catalog are 100% genuine, factory-fresh, and sourced through legitimate industry channels.
|
|
Warranty Advocacy:
|
Every product we sell carries its full original manufacturer’s warranty. While warranties are serviced by the brands themselves, we act as your advocate—handling technical details to ensure your claim is processed fairly.
|
|
Global Reach:
|
Leveraging our massive supply chain, we secure hard-to-find components that other shops can't access. Whether it's a standard upgrade or a custom exotic application, we have the network to get it to your door.
|
|
Secure Logistics:
|
High-value performance parts deserve high-level security. We utilize fully encrypted, PCI-compliant checkout and premium, insured carriers to ensure your investment is protected from the moment you click 'Order' until it’s in your hands.
|
Building something big? If you’re planning a full overhaul or need a custom quote, reach out to our team via our
Contact Page.
Precision Support: Whether you are dialing in a daily driver or sourcing components for a high-performance exotic, our team is here to ensure your project stays on track. Use the channels below for sales, technical assistance, or order updates.
|
Direct Consultation:
|
For sales inquiries, help applying Project Incentives, or immediate assistance with a new order:
(828) 588-5888
Monday – Friday | 9am – 5pm EST
|
|
Technical & Fitment:
|
To qualify for our Fitment Guarantee, please email your vehicle’s Year, Make, Model, and any existing modifications to:
support@autohousesupply.com
Our experts will review your specifications and provide written confirmation for your build.
|
|
Order Inquiries:
|
For tracking updates or status inquiries on existing orders, please reach out via our Contact Form. Having your order number ready will allow us to provide the most efficient update.
|
|
Global Inquiries:
|
We proudly support builds across the US, Canada, Mexico, and worldwide. For international shipping quotes or oversized freight logistics, please contact us via the email link above.
|
Need an immediate answer? Our
Live Chat feature (available in the bottom corner) is the fastest way to connect with a representative during business hours.
At AutoHouse Supply, we are enthusiasts first. Our goal is to provide a seamless logistical experience so you can focus on your build. Please see our standard guidelines below.
|
Secure Shipping:
|
We offer FREE Ground Shipping within the 48 contiguous United States. Most in-stock orders process within 48 hours. For your security, high-value performance parts require a signature upon delivery to ensure they reach you safely.
|
|
Transit Protection:
|
Please inspect your order immediately. Damage must be reported within 48 hours. For freight/LTL items, if you cannot inspect the contents immediately, please write "Subject to Inspection" on the delivery receipt before signing.
|
|
Flexible Returns:
|
Unused items in brand-new, original packaging can be returned within 30 days. While standard refunds incur a 25% restocking fee, we will waive this fee entirely if you choose store credit or an exchange for your next upgrade.
|
|
Exclusions:
|
To ensure every customer receives brand-new, untampered components, parts that have been installed, modified, or used are non-returnable. Custom builds, special orders, and wheel/tire packages are considered final sale.
|
Need assistance? Reach out via our
Contact Form before shipping any items back so we can provide you with an RMA number.
Fitment Guarantee
Fitment guides and tools are helpful—but your car is unique! Some trims and options aren’t always listed, so if you want 100% confidence that a part will fit, our team is happy to double-check for you. We take the guesswork out of your purchase by standing behind our expertise.
|
Verify Your Build:
|
If this product doesn't list your specific vehicle data, simply reach out to support@autohousesupply.com. We will manually verify compatibility for you.
|
|
Our Promise:
|
When we confirm a fitment in writing and it doesn’t work for your application, we cover the return shipping and exchange it at no cost to you.
|
Questions? Send us your
Year, Make, and Model via our
Contact Form and we’ll get you a definitive answer so you can buy with confidence.
