- 2.5" Mandrel Bent Steel Piping
- SS T-Bolt Clamps
- Bolts to Existing Holes on Vehicle
- Short Route Piping for quick spool up
- Eliminates Knock at high boost levels
- Modular design allows for upgrade to single turbo with one pipe
- Battery and Radiator stays in stock location
Installation Details:
- Short Route Piping for quick spool up
- Works with factory T/B Elbow
- No need to relocate Radiator or Battery
- Fits Many turbo kits such as ETS, Greddy, Turbo XS, SFP, Apexi, etc.
- Requires Bumper Support Removal and Core Support Cutting
- Very Clean Set up
Exterior Appearance Details:
- Work with USA and JDM fog lights
- Killer Look !
Our Standard Single and Twin Turbo kit includes 2.5" Piping from turbo to throttle body elbow. If you are using a Greddy Elbow on the throttle body side you will need to use our 3" Greddy Elbow Pipe on the driver side. We do have the option to upgrade both long engine compartment pipes to 3" but only for cars equipped with the Greddy Elbow AND Single Turbo. The 2 Short pipes that connect to the intercooler and intercooler inlet/outlet remain 2.5".
Upgrading to Single from Twin Turbos: To Upgrade to Single turbo you will need to purchase a new Single Turbo upgrade Pipe (found in piping section) and a 2.5" 90 Degree Silicone Elbow.
Performance
The performance of this unit is second to none. We developed it on our shop car (yellow FD in the pictures) which runs a T66, Haltech and all other supporting mods. When we first put the car together it had an Apexi FMIC kit on it we saw decent results but the charge air temps would creep up to 140-150 degrees. Slight detonation would occur in 3rd, 4th and 5th gears as observed on the J&S Knock sensor unit. Also because the tanks were wide and the core was small, the coolant temps were regularly over 210 degrees. All of this was with a pump gas tune at 21psi (10.5 AFR 10 degrees ignition timing). When we switched to the kit pictured above the charge air temperatures dropped to 110 degrees and the highest we have ever seen is 122 degrees. This reduction in charge air temperature has allowed us to run 23psi regularly on pump gas with no detonation. In addition to the reduced charge air temperatures, the coolant temps dropped to 185-195 degrees and never exceed 200 degrees. All of this is with a stock bumper. We have had a handful of customer cars with body kits that see even larger temp reuctions. Typical results for a T66 turbo at 20psi is 95-110 degree charge air temperatures and 180-185 degree coolant temperatures. In addition to the low temperatures these kits provide, the ETS intercooler kit completely fills the stock bumper opening with core and body kits much better than any other kits we have seen with it s ultra wide 30 tank to tank dimension.
Aside from axleback/catback exhausts, clamps & couplers, and ETS Merchandise; we are unable to ship directly into California. These parts will likely need to ship to our location first and then out to you. Additional shipping charges will apply.
*Anodized intercoolers may take about 4-5 weeks, as the anodizing process is outsourced to a third-party company.
*Titanium pipes may take up to 3-4 weeks to ship if they are not in stock.
⚠️ California Proposition 65 Warning:
This product may expose you to chemicals known to the State of California
to cause cancer or reproductive harm.
The AutoHouse Advantage: Global sourcing power paired with specialized expertise. We utilize an expansive supply network of over 600,000 SKUs to deliver world-class components with an enthusiast’s precision.
|
Price Match Guarantee:
|
We are committed to providing the best value. If you find a lower advertised price from a verified vendor, we will match it. Shop with confidence knowing you’re getting the industry's lowest price.
|
|
Project Incentives:
|
We reward enthusiasts who trust us with their major projects. Use these tiered codes at checkout to apply instant savings to your order:
• AH25 — $25 OFF $500+ | • AH60 — $60 OFF $1000+
• AH180 — $180 OFF $3000+ | • AH400 — $400 OFF $6000+
• AH630 — $630 OFF $9000+
|
|
Fitment Guarantee:
|
Avoid the headache of the wrong part. If you are unsure about compatibility, contact us first. If we verify the fitment for your vehicle via email and it doesn’t fit, we will handle the exchange at no cost to you.
|
|
Authorized Retailer:
|
AutoHouse Supply is an Authorized Retailer for our premier brand partners. We utilize an extensive wholesale network to ensure all 600k+ SKUs in our catalog are 100% genuine, factory-fresh, and sourced through legitimate industry channels.
|
|
Warranty Advocacy:
|
Every product we sell carries its full original manufacturer’s warranty. While warranties are serviced by the brands themselves, we act as your advocate—handling technical details to ensure your claim is processed fairly.
|
|
Global Reach:
|
Leveraging our massive supply chain, we secure hard-to-find components that other shops can't access. Whether it's a standard upgrade or a custom exotic application, we have the network to get it to your door.
|
|
Secure Logistics:
|
High-value performance parts deserve high-level security. We utilize fully encrypted, PCI-compliant checkout and premium, insured carriers to ensure your investment is protected from the moment you click 'Order' until it’s in your hands.
|
Building something big? If you’re planning a full overhaul or need a custom quote, reach out to our team via our
Contact Page.
Precision Support: Whether you are dialing in a daily driver or sourcing components for a high-performance exotic, our team is here to ensure your project stays on track. Use the channels below for sales, technical assistance, or order updates.
|
Direct Consultation:
|
For sales inquiries, help applying Project Incentives, or immediate assistance with a new order:
(828) 588-5888
Monday – Friday | 9am – 5pm EST
|
|
Technical & Fitment:
|
To qualify for our Fitment Guarantee, please email your vehicle’s Year, Make, Model, and any existing modifications to:
support@autohousesupply.com
Our experts will review your specifications and provide written confirmation for your build.
|
|
Order Inquiries:
|
For tracking updates or status inquiries on existing orders, please reach out via our Contact Form. Having your order number ready will allow us to provide the most efficient update.
|
|
Global Inquiries:
|
We proudly support builds across the US, Canada, Mexico, and worldwide. For international shipping quotes or oversized freight logistics, please contact us via the email link above.
|
Need an immediate answer? Our
Live Chat feature (available in the bottom corner) is the fastest way to connect with a representative during business hours.
At AutoHouse Supply, we are enthusiasts first. Our goal is to provide a seamless logistical experience so you can focus on your build. Please see our standard guidelines below.
|
Secure Shipping:
|
We offer FREE Ground Shipping within the 48 contiguous United States. Most in-stock orders process within 48 hours. For your security, high-value performance parts require a signature upon delivery to ensure they reach you safely.
|
|
Transit Protection:
|
Please inspect your order immediately. Damage must be reported within 48 hours. For freight/LTL items, if you cannot inspect the contents immediately, please write "Subject to Inspection" on the delivery receipt before signing.
|
|
Flexible Returns:
|
Unused items in brand-new, original packaging can be returned within 30 days. While standard refunds incur a 25% restocking fee, we will waive this fee entirely if you choose store credit or an exchange for your next upgrade.
|
|
Exclusions:
|
To ensure every customer receives brand-new, untampered components, parts that have been installed, modified, or used are non-returnable. Custom builds, special orders, and wheel/tire packages are considered final sale.
|
Need assistance? Reach out via our
Contact Form before shipping any items back so we can provide you with an RMA number.
Fitment Guarantee
Fitment guides and tools are helpful—but your car is unique! Some trims and options aren’t always listed, so if you want 100% confidence that a part will fit, our team is happy to double-check for you. We take the guesswork out of your purchase by standing behind our expertise.
|
Verify Your Build:
|
If this product doesn't list your specific vehicle data, simply reach out to support@autohousesupply.com. We will manually verify compatibility for you.
|
|
Our Promise:
|
When we confirm a fitment in writing and it doesn’t work for your application, we cover the return shipping and exchange it at no cost to you.
|
Questions? Send us your
Year, Make, and Model via our
Contact Form and we’ll get you a definitive answer so you can buy with confidence.
