Description
This is a complete custom set of 83mm 9.5:1 compression ratio JE forged FSR 2.0L stroker pistons designed to IE race spec for all belt-drive 2.0T FSI VW/Audi engines. This is the piston set used in all high horsepower IE race engine builds. Engineered to withstand extreme race punishment, JE's trademarked coating Tuff Skirt ® and JE's own thermal barrier crown coating is utilized.  This piston set features oil ring rail support allowing the piston rings to be moved further down on the piston. Furthermore, upgraded lateral gas ports also come standard to build up pressure behind the compression ring and seal it against the cylinder wall.  The overall strength is completed with a set of JE upgraded tool steel wrist pins. The added displacement by increasing the bore of your engine block yields more power and torque on the same boost pressure, less chance of detonation at a given power level (Lower peak cylinder pressures), faster spool, and increases out of boost power levels.
Â
Features
- 83MM bore 9.5:1 CR, 92.8MM stroker
- Included tool steel wrist pin upgrade
- Included ceramic dome coating
- Included tuff-Skirt coating
- Upgraded oil ring rail support
- Upgraded lateral gas ports
- Includes JE wire locks and Pro Seal piston rings
- No dish deburring or preparation needed
- Individually prepared inspection report of dimensional conformity
- Each piston individually serialized for complete traceability
- 23-point post-production inspection conducted by certified personnel
- Tighter tolerances on 14 critical areas of the piston
- All critical surfaces machined in dedicated Critical Manufacturing Cell
Â
JE's state of the art FSR forgings reduce mass and wear caused by friction without sacrificing strength.  This is accomplished by using an asymmetrical skirt design instead of the traditional full-round skirt, also this reduces weight significantly.  Designed specifically for boosted applications, FSR forgings utilize a larger, stronger skirt on the side of the piston which receives all the side loading during high-pressure combustion process. The opposite skirt is smaller for lightweight.  FSR pistons still use a full-width wrist pin and optimal large, wide pin bosses to carry the load of a turbocharged engine without wearing or ovaling out the pin bosses. In order to combat in cylinder noise commonly found in lightweight pistons, these feature an offset pin and keep very quiet in the bore.  FSR pistons receive strict quality control and 23 point post-production inspection to ensure exact finish and tolerances in critical areas making the lightest, truly heavy duty piston on the market.
Â
More Information
JE FSR design requires oil squirters to be modified or spaced out for clearance on some 2.0T blocks.
  Â
Compatibility
2.0T FSI Engines
Including
- Audi A3Â 8P (05-2013)
-
Audi S3 8P (05-2013)
-
Audi RS3 8P (05-2013)
-
Audi A4 B6 (06-2011)
-
Audi S4 B6 (06-2011)
- Audi S4 B7 (05.5-2008)
-
Audi RS4 B7 (05.5-2008)
-
Audi TT 8J MK III (08+)
-
Audi TTS 8J MK III (08+)
-
Audi TTRS 8J MK III (08+)
- Volkswagen Eos 1F7 (06+)
-
Volkswagen Golf MK5 (06-2009)
-
Volkswagen Golf MK6 R (2012-2013)
-
Volkswagen Rabbit MK5 (06-2009)
-
Volkswagen GTI MK5 (06-2009)
-
Volkswagen Passat B6 (06-2011)
-
Volkswagen Scirocco I
Part Number
JE-PVC-1
Â
More Information
Manufactured by
Integrated Engineering (IE)
Â
⚠️ California Proposition 65 Warning:
This product may expose you to chemicals known to the State of California
to cause cancer or reproductive harm.
The AutoHouse Advantage: Global sourcing power paired with specialized expertise. We utilize an expansive supply network of over 600,000 SKUs to deliver world-class components with an enthusiast’s precision.
|
Price Match Guarantee:
|
We are committed to providing the best value. If you find a lower advertised price from a verified vendor, we will match it. Shop with confidence knowing you’re getting the industry's lowest price.
|
|
Project Incentives:
|
We reward enthusiasts who trust us with their major projects. Use these tiered codes at checkout to apply instant savings to your order:
• AH25 — $25 OFF $500+ | • AH60 — $60 OFF $1000+
• AH180 — $180 OFF $3000+ | • AH400 — $400 OFF $6000+
• AH630 — $630 OFF $9000+
|
|
Fitment Guarantee:
|
Avoid the headache of the wrong part. If you are unsure about compatibility, contact us first. If we verify the fitment for your vehicle via email and it doesn’t fit, we will handle the exchange at no cost to you.
|
|
Authorized Retailer:
|
AutoHouse Supply is an Authorized Retailer for our premier brand partners. We utilize an extensive wholesale network to ensure all 600k+ SKUs in our catalog are 100% genuine, factory-fresh, and sourced through legitimate industry channels.
|
|
Warranty Advocacy:
|
Every product we sell carries its full original manufacturer’s warranty. While warranties are serviced by the brands themselves, we act as your advocate—handling technical details to ensure your claim is processed fairly.
|
|
Global Reach:
|
Leveraging our massive supply chain, we secure hard-to-find components that other shops can't access. Whether it's a standard upgrade or a custom exotic application, we have the network to get it to your door.
|
|
Secure Logistics:
|
High-value performance parts deserve high-level security. We utilize fully encrypted, PCI-compliant checkout and premium, insured carriers to ensure your investment is protected from the moment you click 'Order' until it’s in your hands.
|
Building something big? If you’re planning a full overhaul or need a custom quote, reach out to our team via our
Contact Page.
Precision Support: Whether you are dialing in a daily driver or sourcing components for a high-performance exotic, our team is here to ensure your project stays on track. Use the channels below for sales, technical assistance, or order updates.
|
Direct Consultation:
|
For sales inquiries, help applying Project Incentives, or immediate assistance with a new order:
(828) 588-5888
Monday – Friday | 9am – 5pm EST
|
|
Technical & Fitment:
|
To qualify for our Fitment Guarantee, please email your vehicle’s Year, Make, Model, and any existing modifications to:
support@autohousesupply.com
Our experts will review your specifications and provide written confirmation for your build.
|
|
Order Inquiries:
|
For tracking updates or status inquiries on existing orders, please reach out via our Contact Form. Having your order number ready will allow us to provide the most efficient update.
|
|
Global Inquiries:
|
We proudly support builds across the US, Canada, Mexico, and worldwide. For international shipping quotes or oversized freight logistics, please contact us via the email link above.
|
Need an immediate answer? Our
Live Chat feature (available in the bottom corner) is the fastest way to connect with a representative during business hours.
At AutoHouse Supply, we are enthusiasts first. Our goal is to provide a seamless logistical experience so you can focus on your build. Please see our standard guidelines below.
|
Secure Shipping:
|
We offer FREE Ground Shipping within the 48 contiguous United States. Most in-stock orders process within 48 hours. For your security, high-value performance parts require a signature upon delivery to ensure they reach you safely.
|
|
Transit Protection:
|
Please inspect your order immediately. Damage must be reported within 48 hours. For freight/LTL items, if you cannot inspect the contents immediately, please write "Subject to Inspection" on the delivery receipt before signing.
|
|
Flexible Returns:
|
Unused items in brand-new, original packaging can be returned within 30 days. While standard refunds incur a 25% restocking fee, we will waive this fee entirely if you choose store credit or an exchange for your next upgrade.
|
|
Exclusions:
|
To ensure every customer receives brand-new, untampered components, parts that have been installed, modified, or used are non-returnable. Custom builds, special orders, and wheel/tire packages are considered final sale.
|
Need assistance? Reach out via our
Contact Form before shipping any items back so we can provide you with an RMA number.
Fitment Guarantee
Fitment guides and tools are helpful—but your car is unique! Some trims and options aren’t always listed, so if you want 100% confidence that a part will fit, our team is happy to double-check for you. We take the guesswork out of your purchase by standing behind our expertise.
|
Verify Your Build:
|
If this product doesn't list your specific vehicle data, simply reach out to support@autohousesupply.com. We will manually verify compatibility for you.
|
|
Our Promise:
|
When we confirm a fitment in writing and it doesn’t work for your application, we cover the return shipping and exchange it at no cost to you.
|
Questions? Send us your
Year, Make, and Model via our
Contact Form and we’ll get you a definitive answer so you can buy with confidence.
