| Brand |
J'S RACING |
| Series Name |
TSUCHINOKO AIR INTAKE SYSTEM FRP |
| Product Number |
TCB-P3 |
| Compatible Car |
HONDA CIVIC EP3 |
| Compatible Engine |
K20A |
| Product Description |
Material: FRP
The EP3 dedicated air intake system, which boasts the world's highest specifications and has spent one year of development, is finally here.
Succeeded in taking in the largest fresh air in the bolt-on type air intake market.
As a result of carefully designing the duct shape and BOX shape, we were able to reliably secure power that exceeds the level of experience without sacrificing operability and comfort.
[Intake structure]
We succeeded in taking in fresh air directly by the air intake panel using the left part of the bumper grill.
Fresh air is taken into the main duct from the same suction route as the genuine one without letting it escape.
In addition, it is possible to double-take in even the air that has escaped to the upper part of the grill and the lower part of the bonnet by installing a subduct.
The main duct part not only takes in air using ram pressure, but also the duct itself that adopts the NASA duct shape actively takes in air, demonstrating the Venturi effect.
It is shaped to increase the suction flow rate even when it is stationary.
Of course, the genuine bonnet stay battery can be used as it is.
[Chamber BOX structure]
The chamber BOX part eliminates the resistance of the cross section so that a lot of intake air spreads over the entire surface of the filter, and secures a large capacity of 6000cc.
The filter also uses a large-capacity filter that uses a special cotton material.
1 Air sucked from the duct flows in from the top of the BOX.
(2) If it spreads to the rear as it is, it will flow into the lower part behind the BOX without resistance due to the R-shaped side surface.
3 As a result, we are particular about the inside so that the air can be distributed over the entire area of ​​the BOX.
Of course, even if rainwater etc. enters, there is no situation where water collects because it has a drain hole.
[Component parts]
-Dedicated air intake panel (FRP)
-Dedicated air intake duct (FRP)
-Dedicated air chamber BOX (FRP)
-Dedicated filter variant Joint (FRP)
-Vibration absorption type rubber mount bolt
-Each self-lock nut, bolt, tapping screw, gap tape included
If the filter becomes dirty, it can be used again with the optional cleaning kit. Is possible.
In addition, a replacement filter is also set, so please be assured of the after-sales aspect. |
| Remarks |
Engine: K20A
Applicable model: Compatible with all EP3 models regardless of the first half or the second half (TYPE-R)
Applicable bumper: Compatible with genuine bumpers
* Due to the structure of EP3, the engine moves back and forth during starting and sports driving.
We have conducted clearance design and running tests with this in mind, but we recommend using an engine torque damper together to prevent large movements.
Also, when installing this product, check for any abnormalities in the engine mount before installing this product.
For vehicles that have been replaced with a bonnet with a duct, etc., there is a risk of interference with the duct part due to the structure that prioritizes suction, so it is necessary to cut the interference part of the bonnet.
Normal and normal shape bonnets can be installed without interference. |
| Notes |
Images are for illustration purpose only. Actual product may vary. |
⚠️ California Proposition 65 Warning:
This product may expose you to chemicals known to the State of California
to cause cancer or reproductive harm.
The AutoHouse Advantage: Global sourcing power paired with specialized expertise. We utilize an expansive supply network of over 600,000 SKUs to deliver world-class components with an enthusiast’s precision.
|
Price Match Guarantee:
|
We are committed to providing the best value. If you find a lower advertised price from a verified vendor, we will match it. Shop with confidence knowing you’re getting the industry's lowest price.
|
|
Project Incentives:
|
We reward enthusiasts who trust us with their major projects. Use these tiered codes at checkout to apply instant savings to your order:
• AH25 — $25 OFF $500+ | • AH60 — $60 OFF $1000+
• AH180 — $180 OFF $3000+ | • AH400 — $400 OFF $6000+
• AH630 — $630 OFF $9000+
|
|
Fitment Guarantee:
|
Avoid the headache of the wrong part. If you are unsure about compatibility, contact us first. If we verify the fitment for your vehicle via email and it doesn’t fit, we will handle the exchange at no cost to you.
|
|
Authorized Retailer:
|
AutoHouse Supply is an Authorized Retailer for our premier brand partners. We utilize an extensive wholesale network to ensure all 600k+ SKUs in our catalog are 100% genuine, factory-fresh, and sourced through legitimate industry channels.
|
|
Warranty Advocacy:
|
Every product we sell carries its full original manufacturer’s warranty. While warranties are serviced by the brands themselves, we act as your advocate—handling technical details to ensure your claim is processed fairly.
|
|
Global Reach:
|
Leveraging our massive supply chain, we secure hard-to-find components that other shops can't access. Whether it's a standard upgrade or a custom exotic application, we have the network to get it to your door.
|
|
Secure Logistics:
|
High-value performance parts deserve high-level security. We utilize fully encrypted, PCI-compliant checkout and premium, insured carriers to ensure your investment is protected from the moment you click 'Order' until it’s in your hands.
|
Building something big? If you’re planning a full overhaul or need a custom quote, reach out to our team via our
Contact Page.
Precision Support: Whether you are dialing in a daily driver or sourcing components for a high-performance exotic, our team is here to ensure your project stays on track. Use the channels below for sales, technical assistance, or order updates.
|
Direct Consultation:
|
For sales inquiries, help applying Project Incentives, or immediate assistance with a new order:
(828) 588-5888
Monday – Friday | 9am – 5pm EST
|
|
Technical & Fitment:
|
To qualify for our Fitment Guarantee, please email your vehicle’s Year, Make, Model, and any existing modifications to:
support@autohousesupply.com
Our experts will review your specifications and provide written confirmation for your build.
|
|
Order Inquiries:
|
For tracking updates or status inquiries on existing orders, please reach out via our Contact Form. Having your order number ready will allow us to provide the most efficient update.
|
|
Global Inquiries:
|
We proudly support builds across the US, Canada, Mexico, and worldwide. For international shipping quotes or oversized freight logistics, please contact us via the email link above.
|
Need an immediate answer? Our
Live Chat feature (available in the bottom corner) is the fastest way to connect with a representative during business hours.
At AutoHouse Supply, we are enthusiasts first. Our goal is to provide a seamless logistical experience so you can focus on your build. Please see our standard guidelines below.
|
Secure Shipping:
|
We offer FREE Ground Shipping within the 48 contiguous United States. Most in-stock orders process within 48 hours. For your security, high-value performance parts require a signature upon delivery to ensure they reach you safely.
|
|
Transit Protection:
|
Please inspect your order immediately. Damage must be reported within 48 hours. For freight/LTL items, if you cannot inspect the contents immediately, please write "Subject to Inspection" on the delivery receipt before signing.
|
|
Flexible Returns:
|
Unused items in brand-new, original packaging can be returned within 30 days. While standard refunds incur a 25% restocking fee, we will waive this fee entirely if you choose store credit or an exchange for your next upgrade.
|
|
Exclusions:
|
To ensure every customer receives brand-new, untampered components, parts that have been installed, modified, or used are non-returnable. Custom builds, special orders, and wheel/tire packages are considered final sale.
|
Need assistance? Reach out via our
Contact Form before shipping any items back so we can provide you with an RMA number.
Fitment Guarantee
Fitment guides and tools are helpful—but your car is unique! Some trims and options aren’t always listed, so if you want 100% confidence that a part will fit, our team is happy to double-check for you. We take the guesswork out of your purchase by standing behind our expertise.
|
Verify Your Build:
|
If this product doesn't list your specific vehicle data, simply reach out to support@autohousesupply.com. We will manually verify compatibility for you.
|
|
Our Promise:
|
When we confirm a fitment in writing and it doesn’t work for your application, we cover the return shipping and exchange it at no cost to you.
|
Questions? Send us your
Year, Make, and Model via our
Contact Form and we’ll get you a definitive answer so you can buy with confidence.
